Vaccum Lifter

Hand held hydraulic machine allowing easy transfer of panels through different working areas. Vaccum lifting capacity is 500 kilograms per panel.

Vaccum Lifter

Simplifies movement of formwork panels enabling greater speed and productivity.

Formwork Panel Ejector

Elements with defective formwork facing are pushed into the machine manually via an entry roller table. Following the ejection process, the frames are removed from the machine and can be reworked immediately (removing bolts / rivets or silicone etc).

Formwork Panel Ejector

uses hydraulic rams to press formwork panels from their framing allowing them to be quickly repaired.

Roller tables 

A set of roller tables consists of a table (L x W) 2.50m x 1.45m and a table (L x W) 2.50m x 0.50m. These are installed in front of the machine and behind the machine. They can be used as deposit or collection location or as processing/working table for the elements.

CCM vacuum_lifter_1
Vacuum lifting equipment for hooking into a crane hook. Suitable for conveying workpieces up to a weight of 500 kg horizontally.
CCM vacuum lifter
Vacuum lifting equipment for hooking into a crane hook. Suitable for conveying workpieces up to a weight of 500 kg horizontally.
CCM slab_pressing_equipment_for_ceiling_formwork_1 (1)
CCM slab_pressing_equipment_for_ceiling_formwork_3
CCM roller_tables_1
A set of roller tables consists of a table (L x W) 2.50m x 1.45m and a table (L x W) 2.50m x 0.50m. These are installed in front of the machine and behind the machine. They can be used as deposit or collection location or as processing/working table for the elements.
Show More
Dust extraction 

This powerful device picks up the cement dust created during cleaning and collects it in a disposal container.

Prop Leveller / Straightener

Hydraulically operated press to remove bulging dents and curvatures in props.

 Prop Leveller / Straightener

1. Pulls out jammed inner tubes.

2. Straightens bent outer tubes. 

3. Presses damages (dents) in the Foot area of ​​the outer tube. 

All processes are Hydraulically supported.

 Prop Leveller / Straightener

1. Pulls out jammed inner tubes.

2. Straightens bent outer tubes. 

3. Presses damages (dents) in the Foot area of ​​the outer tube. 

All processes are Hydraulically supported.

Column Swinging Crane

Allows easy movement of formwork equipment within the working environment.

CCM-Dust Extraction
This powerful device picks up the cement dust created during cleaning and collects it in a disposal container. (includes tubing to the machine).
leveling_equipment_for_ceiling_supports_4
leveling_equipment_for_ceiling_supports_2
leveling_equipment_for_ceiling_supports_3
column_swing_crane_1
Show More
Cup Brushes

Are available in steel wire or nylon interchangeable bristles for cleaning wooden, metal or plastic formwork panels.

Automatic height adjustment

In the standard implementation the height adjustment is done by the worker electrically. With automatic height adjustment a sensor recognizes the height of the element and the setting of the machine is done by the control. This way unsorted element batches can be cleaned in a time saving way.

Remote maintenance

Using modern remote maintenance, faults in the on-site equipment can be computer analysed. These faults can then be immediately resolved or the machine operator is offered assistance.

Recipe Selection

Recipe selection for formwork systems includes the integration of recipe selection for up to 10 different formwork systems and formwork materials. After selecting the width, the plant will automatically adjust height, width and number of activated surface brushes. After selection of the material of the panel (polypropylene, wood-plastic combos and plywood panels), the control regulates speed and contact pressure of the brushes to a defined value. 

Statistical evaluation

Using additional mechanics, sensors and programming, the cleaning performance of the equipment can be captured and evaluated.

 

Show More
Show More

Regional Representative Australasia

cleaning_machines_for_frame_formwork_3
cleaning_machines_for_frame_formwork_2
Show More
FCM 5
Show More

Multi Domes

0